You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
Joinery Profiles — Panel Edging
Description

Stickman extruded aluminium profiles are used to protect and enhance joinery. Stickman Panel Edges provide joinery with aesthetics, strength and protection for MDF, particle board (PB), and plywood. Prior to Stickman being available, laminated panel corners and edging were easily damaged. The chipped corners were unsightly, and often sharp making them dangerous.

Panel corners and butt joins are machined with Stickman tooling. Site or factory assembly is precise and fast. Stickman adhesive eliminates the need for screws, and provides a strong bond for panel and profile.

The Stickman Assembly Process

Key Features
  • Protect and enhance joinery, preventing chipping and dangerous sharp edges
  • Profiles for 90 and 135 degree corners — capping, joining, edging, and concealed fixing
  • Available in mill finish, anodised, and powdercoated
  • Standard length is 5m, profiles can be supplied to length for specific projects to minimise waste
  • Panels are machined with special Stickman tooling, suitable for smaller production runs as well as volume production on CNC routers with flatbeds
  • Use Stickman adhesive or other quality construction solvent free adhesives in assembly — no need to drill and use screws. The assembly process can be accelerated by using a punch
  • On site assembly reduces transport costs, aids site access in lifts, and reduces damage in transport issues
  • Profiles are used with MDF, PB, PLY and other composite panel types that can be machined and glued as if wooden
  • Profiles are available for use with panel thicknesses from 12mm upwards
Scope of Use
  • Protect panel corners in high traffic areas — commercial and residential use: 
    • Hospitals, hotels, universities, airport terminals, schools, libraries, banks, retail outlets, shopping centres
    • Apartments and residential kitchens
  • Provide structural strength to corners for joinery and for walls
Limitations on Use
  • Recommended for interior use
  • Stickman profiles themselves are unaffected by moisture — however the panels and adhesives need to be suitable for exterior use 
In-Service History

Stickman has been in use since 2000. First launched in New Zealand, and since exported extensively to Australia, Canada, USA, Pacific Islands, and remote destinations such as Mauritius.

Used extensively in domestic and commercial furniture and buildings. 

Documents
Caps and Accessories
Corners

Stickman aluminium profiles are used in joinery and construction projects for corners and
joining of MDF, PB, and Ply panels from 12mm thickness upwards.

Product Enquiries

News from Stickman

New Stickman Drawer Pulls
Off-Site Assembly with Stickman
Stickman Profiles Ensure Smooth Aesthetic for Kitchens
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.