Cleanout / inspection point drains are designed to provide an access point for maintenance to drainage systems that have been buried or otherwise inaccessible.

• Suitable for use in commercials buildings
• Inspection / cleaning / rodding point on long runs of DWV pipe
• Interior or exterior use
• Suits 150mm pipes

If cleanout is located inside a building a lid with seal must be selected as per G13/AS2 Figure 10. The following product apply to this install scenario - BT100, BT PVC, Cast Bronze Vinyl Cleanout, Vinylrite Cleanouts. All products are applicable to external applications.

NZBC G13/AS2: Allproof cleanouts provide the ability to install an inspection point / rodding point to 

drainage systems in accordance with clause 5.7 and Figure 10.

NZBC G13/AS3: Allproof BT100, BT PVC, Cast Bronze Vinyl Cleanout, Vinylrite Cleanouts provide the 

ability to install an inspection point / rodding point to drainage systems in accordance with clause 4.4 of 

ASNZS3500.2-2018 as referenced in G13/AS3.

B2/AS1 Durability: B2.3.1 - Allproof cleanout systems meet the requirements of B2.3.1 (a) not less than 

50 years, (b) not less than 15 years and (c) not less than 5 years

• Horizon hotel and Auckalnd Convention Centre.
• AUT.
• Ponsonby Central.