• Designed to work as a waterproofing layer below a finished tiled floor in a shower area where water is present
• Shower trays provide an outlet into an Allproof waste system and are buffed to create a textured surface for screed and membrane bonding
• Product is fully customisable and will be made bespoke to specific requirements

• To be installed as per published installation guides.
• For commercial and/or residential applications. 
• Compatible with other AS/NZS and NZBC compliant DWV systems, waterproofing membrane systems and flooring systems.
• To achieve a level entry shower some design considerations need to be applied, see design requirements section.

• NZBC E3 Internal Moisture E3.3.3.1: All Allproof shower trays provide an impervious floor to shower spaces. E3.3.3.2.2 & Figure 4: All Allproof shower trays are designed to comply with the requirements of Figure 4 regarding the junction between the floor and wall. E3.3.3.2.3: Trays where an upstand, wall, screen, or curtain is omitted provide either a bult in fall or the ability to create one of no less than 1:50.
• NZBC E3 Internal Moisture E3.3.3.1: All Allproof shower wall niches provide an impervious barrier to be installed as recessed wall shelves within a shower spaces.
• NZBC E3 Internal Moisture E3.3.3.2: Allproof Tile Over Stainless and Tile Over Screed shower trays provide an impermeable shower base that can incorporate a level threshold into the design for the use of people with disabilities.
• G1/AS1 Personal hygiene G1.1, G1.3.2 and clause 2.5: Allproof Trayrite floor wastes are designed to provide an appropriate drainage solution for showers required for personal hygiene. Allproof shower trays and wastes are designed to safely remove wastewater removing risk of contamination, when cleaned and maintained correctly shower trays and wastes shall not harbour dirt and germs. 
• NZBC G13/AS1 Foul water G13.1(b), G13.3.1(c) & (d) and clause 3.4 Floor Outlets: Allproof floor waste systems (water traps and grates) have been designed and manufactured to be compliant to all requirements set out in G13/AS1:
  • The water seal in the gully prevents foul air and gases entering buildings,
  • Grates are removable to access the system for maintenance and cleaning,
  • Grates finish flush with the floor,
  • Outlets exceed the minimum diameter.

Refer to install guides and specifications for further information.

• NZBC G13/AS3 Foul water and AS/NZS 3500.2 clauses 4.6: Allproof floor waste systems have been designed to comply with all criteria outlined in AS/NZS 3500.2 and modifications covered in NZBC G13/AS3. Outlet connections designed to specifications in Appendix A of 3500.2. Gullies designed in accordance to requirements in clause 4.6.
• B2/AS1 Durability: B2.3.1: Allproof shower tray systems meet the requirements of B2.3.1 (a) not less than 50 years, (b) not less than 15 years and (c) not less than 5 years.

Allproof have successfully supplied this product to New Zealand homes and commercial projects.

This product's current popularity has stemmed from renovations being made on old villas where a similar system is removed and it has become apparent that the surface and structural integrity of the building is completely free of water damage.