Reducing Construction Waste with 100% Recyclable Mammoth Insulation

With effort to reduce construction waste, New Zealand insulation manufacturer Mammoth, is leading the charge with its approach to sustainable products. From the production line to site delivery, installation, and end-of-life, Mammoth takes full responsibility for its material through a zero-waste manufacturing processes, and an unrivalled recycling program.

The construction industry faces a challenge of managing waste, with nearly half of all landfill rubbish in New Zealand originating from construction activities. Mammoth’s solution is to address the issue at its source: product manufacturing. By making insulation products from a recyclable base material, offcuts from site, or insulation at the end of the building's life can be returned to Mammoth for reintegration into the manufacturing process. The Mammoth insulation product is 100% recyclable, it can always be reused again and again. Every 100 square metres of Mammoth insulation incorporates the equivalent of up to 15,600 500ml plastic bottles.

Mammoth’s commitment to sustainability doesn’t stop at manufacturing. The company have an established, robust take-back program for clients. Recycling bins for return of Mammoth insulation offcuts are available at Auckland, Hamilton, Tauranga, and Wellington. There is also opportunity to return material outside these area by arrangement. These bins across the country allow easy return of material for recycling, thereby reducing the environmental impact.

This take-back initiative is not limited to just offcuts, the program includes recycling of the plastic packaging, which is deliberately designed to be 100% recyclable. Mammoth Insulation are always working towards reducing waste in the construction industry, championing a zero-waste manufacturing process and offering a comprehensive recycling program to try make a difference, rather than just burying waste in the ground.

To find out how you can take part in Mammoth Take-back program, contact the Mammoth Customer Care Team on 0800 626 668

Mammoth Acoustic Wall Insulation

Mammoth Insulation

View Product

Mammoth acoustic wall insulation (previously NOVAhush) is made in New Zealand from 100% lofted, thermally bonded polyester fibres.

Declare LBC Red List Free

NZ Made

NZ-Owned Business

Pre-Consumer Recycled Content

Mammoth Acoustic insulation is designed for internal, timber-framed wall or mid-floor cavities.

Clause B2 Durability: Performance B2.3.1(a) not less than 50 years and B2.3.1(b) 15 years. Mammoth Insulation will meet this requirement.
Clause E3 Internal Moisture: Performance E3.3.1. Mammoth Insulation will contribute to meeting this requirement. See Paragraphs 13.1 and 13.2.
Clause F2 Hazardous Materials: Performance F2.3.1. Mammoth Insulation meets this requirement and will not present a health hazard to people.

Mammoth Ceiling Insulation

Mammoth Insulation

View Product

Mammoth ceiling blanket insulation is made in New Zealand from lofted, thermally bonded polyester fibres.

Declare LBC Red List Free

Eco Choice Aotearoa

Homestar / Green Star

Pre-Consumer Recycled Content

NZ Made

NZ-Owned Business

Mammoth ceiling blanket insulation is designed to be used as thermal insulation in timber framed or part framed ceilings of domestic and commercial buildings.

In the opinion of BRANZ, Mammoth Insulation if designed, used, installed and maintained in accordance with the statements and conditions of this Appraisal, will meet or contribute to meeting the following provisions of the NZBC:

Clause B2 Durability: Performance B2.3.1(a) not less than 50 years and B2.3.1(b) 15 years. Mammoth Insulation will meet this requirement.

Clause E3 Internal Moisture: Performance E3.3.1. Mammoth Insulation will contribute to meeting this requirement. See Paragraphs 13.1 and 13.2.

Clause F2 Hazardous Materials: Performance F2.3.1. Mammoth Insulation meets this requirement and will not present a health hazard to people.

Clause H1 Energy Efficiency: Performance H1.3.1 (a) and H1.3.2 E. Mammoth Insulation will contribute to meeting these requirements. See Paragraphs 14.1 and 14.2.

BRANZ Appraised

Mammoth Acoustic Bafflestack

Mammoth Insulation

View Product

Mammoth Acoustic Bafflestack (previously NOVAhush) insulation is made in New Zealand from 100% lofted, thermally bonded polyester fibre.

Declare LBC Red List Free

NZ Made

NZ-Owned Business

Pre-Consumer Recycled Content

Mammoth Acoustic Bafflestack is designed for use in the ceiling cavity to reduce sound transmission over the ceiling path. In high rise buildings and offices, the Bafflestacks are commonly used over 63mm and 89mm stud fit outs with acoustic infill (with or without resilient rails) and compressed.

Clause B2 Durability: Performance B2.3.1(a) not less than 50 years and B2.3.1(b) 15 years. Mammoth Insulation will meet this requirement.
Clause E3 Internal Moisture: Performance E3.3.1. Mammoth Insulation will contribute to meeting this requirement. See Paragraphs 13.1 and 13.2.
Clause F2 Hazardous Materials: Performance F2.3.1. Mammoth Insulation meets this requirement and will not present a health hazard to people.

Categories

Popular Products

Popular Brands

Features

Sections

This Month

Murihiku Marae’s Tohorā-Inspired Design Showcases Techlam's Curved Glulam Beams

Achieve Complex Decking Designs without Budget Blowouts

Electric, Like You've Never Seen Before: Introducing Escea LE Series

SECTIONS

What Shading is Needed for Summer Cooling?

The Relationship Between E1 and E2

What Happens When a Warm Roof System with PIR Insulation Catches Fire?