Eurothane GP PIR is suitable for use in any type of residential, commercial or industrial building and can be used for both new builds and retrofit projects.

As wall insulation it is well suited for use:

• Between the studs in timber or metal framed walls
• Over the studs externally, creating an air-tight envelope with no thermal bridging
• Over the studs internally as a wall lining
• Before attaching GIB plasterboard
• To insulate concrete walls
• To insulate brick veneer wall construction

• Must be used in accordance with the supplier Installation Guide

Eurothane GP PIR will, if employed in accordance with the supplier’s installation requirements, satisfy the following clauses of the Building Code:

• B2 Durability: Performance B2.3.1(a)
• C2 Prevention of Fire Occurring: C.VM2, A1.7
• E3 Internal Moisture: Performance E3.3.1
• F2 Hazardous Building Materials: Performance F2.3.1
• H1 Energy Efficiency: Performance H1.3.1(a), H1.3.2E

• Rot-proof, does not degrade if exposed to moisture
• High compressive strength — 140kPa

R-Values

Environmental Information

• Eurothane GP is CFC and HCFC-free, i.e. zero ozone depletion potential (ODP)
• It is a pentane-blown polyisocyanurate foam which results in a global warming potential (GWP) of below 5 and an overall 'A' Rating in the Green Specification Guide
• ISO-14001-2015 Certified