You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Retractable Roofs
Description

Louvretec's new Retract Roof range feature sleek, new Slimline louvres.

  • 220/35 Slimline Retract Roof
  • 220/45 Alpine Retract Roof

Retract Roofs take it one step further, Retract the Roof Louvres back to enjoy the sky above, or bring them back overhead when operable overhead shelter is required.

Louvretec Retract Louvres can also be specified as standard pivoting Opening Roofs — ideal for multi-roof projects.

 

Key Features
  • Choose either the 220/35 Slimline Retract Roof or the 220/45 Alpine Retract
  • 220/45 Alpine Retract Roof is a larger spanning version of the 220/35 Slimline Retract Roof
  • The 220/45 Alpine Roof is ideal for high wind zones and alpine and exposed coastal sites
  • Retract Louvre Blades are also compatible as a standard Spiral Pivot Roof 
  • Motorised 
  • Retract Louvres feature a neat, tapered top and flat bottom
  • Blades stack neatly and quietly
  • Can be operated by a customised remote or from a device
  • Drive systems are concealed
  • Residential or commerical premises — ideal for restaurants and cafes
  • Retract the louvres back to enjoy the sky above
  • Louvres open and close when back in the overhead position
  • Choose to retract the blades from one end or from both ends 
  • Frame options include a Three Sided Frame or Four Sided Frame
  • Extra wide gutter for extra storm-water protection
  • Cushion closing onto a bulb seal strip
  • Design strength of an extruded double box-section
  • Increased closing cover angle for added weather protection
  • Suitable for residential & commercial projects
  • Engineered to meet the most demanding requirements
  • Louvretec frames or can work with the project's builder
  • Sun & privacy protection
  • Regulate sunlight to help save on energy
  • Fully engineered 
NZ Made
NZ Made
NZ-Owned Business
NZ-Owned Business
Scope of Use
  • Louvretec Retract Roofs are an exterior, permanent, aluminium, louvre system with operable and retracting blades
  • Wind Zones determine the span
  • Designed for New Zealand's climate and conditions
  • Constructed of aluminium for durability
  • Specified to create a functional outdoor room for decks, verandahs and patio areas
  • Frame options include a 3-Sided, 4-Sided Louvretec frame or a Retract Roof can be incorporated in to a frame by others
  • Frame is connected to posts (number of posts dependent on requirements) the frame is mounted to a structural wall
  • Louvretec Retract Roofs are engineered to standards NZ3604
  • Choose either the 220/35 Slimline Retract Roof or the 220/45 Alpine Retract
  • 220/45 Alpine Retract Roof is a larger spanning version of the 220/35 Slimline Retract Roof
  • The 220/45 Alpine Roof is ideal for high wind zones and alpine and exposed coastal sites
Limitations on Use
  • Wind Zone — determines style of Retract Roof, the span, frame and posts options as set out in the 2025 Louvretec Design Manual
  • Installation must be by Louvretec Installations team
  • For residential and commercial projects
In-Service History
  • Louvretec's Retract Roof range has been available for ten years and 2025 sees the introduction of two new Retract Roofs to the range, the 220/35 Slimline Retract and the 220/45 Alpine Retract Roof
  • Louvretec Retract Roofs are regularly specified on stunning coastal, country and city homes. Tara Iti Golf Club in Mangawhai also features a Louvretec Retract Roof as do beautiful restaurants such as Sugar Hill in Melbourne and Sora on Pirie Restaurant - Bringing operable, functional spaces with premium design. 
  • With a 25 year heritage Louvretec is a market leader in the louvre systems industry. Louvretec is New Zealand owned and operated and manufactures, designs and installs a premium range of Retract Roofs, Opening Roofs, Sun Louvre systems and Sliding Glass Doors
  • Louvrecare is Louvretec's valet and maintenance division. Louvrecare 'Care and Maintenance Department' was established more than 15 years ago & exists to ensure your louvres remain in optimal condition.
Other Performance Attributes
  • Louvretec Louvres can be powdercoated, anodised or finished in a wood grain timber-look 
  • Louvretec Louvres are constructed of aluminium 
  • Engineered
  • See Warranty document
Documents
Technical/Design Manual

Louvretec 2025 Design Manual

Louvretec 2025 Design Manual — Full

2025

Maintenance and Warranty

Louvretec 2025 Retract Roof Warranty

Brochure

Louvretec 2025 Retract Roof Brochure

Louvretec Lighting and Heating Brochure

2025

CAD/PDF Details
Typical Detail | 220/35 Slimline Retract Roof - Motorised

3.13

Louvretec 2025 Design Manual

Typical Detail | 220/45 Alpine Retract Roof

3.16

Louvretec 2025 Design Manual

BIM
3D Model | 220/35 Slimline Retract Roof - 3 Sides Retracting to one side
3D Model | 220/35 Slimline Retract Roof - Frame 3 Sides fitting in to 4 Sided Frame Blades Retracting to one end
3D Model | 220/35 Slimline Retract Roof - Retracting to both sides

Louvretec 2025 Design Manual

3D Model | 220/35 Slimline Retract Roof - Retracting to one side

Louvretec 2025 Design Manual

3D Model | 220/35 Slimline Retract Roofs with internal beam - Retracting to both sides
3D Model | Lighting to Front Face of Opening Roof Gutter

Louvretec 2025 Design Manual

Create an outdoor room for more space, privacy and sun control with Louvretec Opening Roofs, Retractable Roofs, Sun Louvre systems, Shutters, Sliding Glass Doors, Outdoor Blinds & Heating and Lighting

Product Enquiries

News from Louvretec

Opening Roof Gives Homeowners Year-Round Outdoor Living on Hibiscus Coast
Louvretec Unveils New Solar Powered Opening Roof NEW
New Operable Louvres in a Stand Off Frame
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.