Seratone is ideal for areas where hygiene is of particular importance, where easy to clean or low maintenance wall and ceiling surfaces are required and for performance in wet areas.

Seratone panels can be used in dry, wet or hygiene area applications such as:

• Bathrooms
• Laundries
• Shower wall and ceiling linings
• Retail fitouts
• Partitioning
• Service and food processing areas
• Kitchen splashbacks

Consult the Seratone Technical Information Brochure for more information.

Seratone is interior use only product and cannot be used outdoors. 

When stored, handled, installed and maintained in accordance with the Seratone Technical Information Document, Seratone will meet the durability requirements of the New Zealand Building Code (NZBC) B2/AS1 and has a servicable life of at least 15 years.

• B1.3.1, B1.3.2 and B1.3.3 (a) and (j) Seratone meets the requirements for loads arising from self-weight and typical soft body impacts normally expected in areas where the product will be used.
• E3.3.4, E3.3.5 and E3.3.6 Seratone panels are impervious to water and are easily cleaned, and can be used to form modular or multiple lining systems meeting the requirements of ES/AS1 Paragraph 3.1.2(h).
• G3.3.2 (a), (b): When installed within the above scope and in accordance with the Manufacturer's Literature, Seratone systems are suitable for installing next to appliances and facilities as specified by G3/AS1 Paragraph 1.6 for wall linings in domestic facilities and Paragraph 2.1.5 for wall linings in commercial and industrial facilities

Seratone AQUA

HPL / Compact laminate is an acceptable solution in E3/AS1 3.1.2, clasuse g, for a wet areas wall lining panel. (g) "Water resistant sheet linings finished with decorative high pressue laminate or factory applied polyurethane". When stored, handled, installed and maintained in accordance with the Seratone Aqua technical information that is current at the time of installation, Seratone Aqua will meet the durability requirements of the New Zealand Building Code (NZBC) B2/AS1 and has a serviceable life of at least 15 years in wet areas and 5 years in all other internal applications. 

Seratone AQUA PLUS

Seratone AQUA PLUS is a water resistant sheet lining with a factory applied polyurethane coating and is an acceptable solution in E3/AS1 3.1.2, clause (d) for a wet area wall lining panel. When stored, handled, installed and maintained in accordance with Technical Information that is current at time of installation, Seratone AQUA PLUS will meet the durability requirements of the New Zealand Building Code (NZBC) B2/AS1 and meets the requirements for a serviceable life of 15 years in wet areas and 5 years in all other internal applications.

Seratone has been marketed and distributed New Zealand by Laminex New Zealand since the mid-1970s.