Resene SpaceCote Flat by Resene

Resene SpaceCote Flat

Description

Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. Also available in fly deterrent formulation to minimise the appearance of unwanted fly spots. Fly deterrent version designed for interior use only. Also ideal as a washable ceiling finish.

Key Features

Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range.
Flat finish minimises the appearance of minor surface defects.
Very durable, abrasion resistant finish that can be easily cleaned. Ideal for GIB ToughZone areas.
Non-yellowing.
May be used wherever solventborne enamels have traditionally been used.
Resene SpaceCote Flat may be applied over Resene Quick Dry (see Data Sheet D45) or directly over sound, clean old enamel surfaces.
Clean, spatter free application.
Fly deterrent variant will discourage flies from landing and resting on painted surfaces minimising the appearance of fly spots.
An Eco Choice approved product.

Scope of Use

Architraves
Bathrooms
Furniture
Kitchens
Laundries
Plywood
Skirtings
Timber doors
Wallboards
Window frames

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Ensure the correct primers and/or sealers are used.
Due to waxes used in fibre and particle board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
Although serviceable within 12-48 hours, full print and solvent resistance takes 30 days to develop.