Mammoth Wall Insulation by Mammoth Insulation

Mammoth Wall Insulation

Mammoth Insulation

All products

Product Enquiries

Description

Mammoth wall insulation is made in New Zealand from 100% lofted, thermally bonded polyester fibres. Mammoth wall sections and blanket are designed to be installed into wall cavities to provide thermal insulation. Wall, airlay sections are designed to be friction fitted into the wall cavity which creates a seamless, smooth fit without tucks, creases or gaps. This supports higher thermal performance across the system.

Mammoth Wall section product range: R1.9, R2.0, R2.2, R2.5, R2.8, and R3.2.
Mammoth Wall blanket product range: R2.2 and R2.6.
Mammoth Masonry Wall blanket and sections product range: R1.0 and R1.3.

Key Features

Mammoth wall insulation creates a healthier, more comfortable home or work environment — costing less to heat and cool
Mammoth products contain recycled polyester fibres.
Mammoth wall blanket insulation uses up to 5,600 recycled plastic bottles per 100m²*
Mammoth wall sections use up to 15.600 recycled plastic bottles per 100m²*
Mammoth masonry wall sections use up to 7,800 recycled plastic bottles per 100m²*
Mammoth wall products are BRANZ appraised (durability 50 years). Mammoth polyester products are backed by a 50 year manufacturer's warranty
No precautions are required for handling Mammoth. It will not cause irritation when touched and it gives off no fumes or odours
Mammoth products are chemical free - no formaldehyde or insecticides. Mammoth products are safe and easy to work with
Mammoth wall insulation assists in absorbing noise to create a quieter environment
Mammoth products are moisture resistant
All Mammoth products are Red List Free — International Living Future Institute
Manufactured by InZone Industries Ltd — a carboNZero certified organisation
Mammoth products contain recycled polyester fibres. The recycled fibre comes from recycled plastic bottles
Mammoth products are made in a near zero waste production process and are fully recyclable
Mammoth R2.5 wall sections and R2.6 wall blanket products are Environmental Choice certified

* Estimate based on 500ml plastic bottles (16.2g each).

Ranges

Mammoth Thermal Insulation

Declare LBC Red List Free

NZ Made

NZ-Owned Business

Post-Consumer Recyclable Content

Scope of Use

Mammoth wall insulation is designed for use as thermal insualtion in timber framed wall cavities.

Statement of Building Code Compliance

In the opinion of BRANZ, Mammoth Insulation if designed, used, installed and maintained in accordance with the statements and conditions of this Appraisal, will meet or contribute to meeting the following provisions of the NZBC:

B2 Durability: Performance B2.3.1 (a) not less than 50 years and B2.3.1 (b) 15 years. Mammoth insulation will meet this requirement. See Paragraph 8.1
E3 Internal Moisture: Performance E.3.3.1. Mammoth insulation will contribute to meeting this requirement. See Paragraphs 13.1 and 13.2
F2 Hazardous Building Materials: Performance F2.3.1. Mammoth insulation meets this requirement and will not present a health hazard to people.
H1 Energy Efficiency: Performance H1.3.1 (a) and H1.3.2 E. Mammoth insulation will contribute to meeting these requirements. See Paragraphs 14.1 and 14.2.

Other Performance Attributes

Performance is guaranteed for 50 years
Non-toxic and Non-irritant: OSH Health and Safety Guidelines for the Selection and Safe Handling of Synthetic Mineral Fibres. Department of Labour, 1194, P18.
Fire Testing:
- AS1530 Part 3 — Ignitability (0), Spread of Flame (0), Heat Evolved (0) and Smoke Developed (3)
- AS/NZS 60695.2.11 — Glow wire Flammability test (passed)
- AS/NZS 60695.11.5 — Needle-flame test (passed)
VOC Emission Test: Total VOC < 0.005mg/m3 (level below detection) and Formaldehyde < 0.009mg/m3 (level below detection)
Non Corrosive: AS/NZS4859.1 (Polyester has alkalinity of PH7.8
Vermin Resistant: not a food source for vermin (and not treated)