• Slatted Ceiling System
• Suspended Grid
• Indoor
• Outdoor

Fixing options

• InnoCeil Concealed Clip Fixing: 

Ceiling System utilises a stainless-steel clip attached to each profile and screws into the ceiling substrate without exposed fixings. The system is easy to install and delivers consistent shadow lines between the boards for a smart uniform look.

• Secret Fixed Shiplap:

Innowood shiplap ceiling system is based on a traditional tongue and groove design, the Shiplap Ceiling System creates a clean finish with uniform joints but without any visible fixings.

• Suspended Click-On System

Ceiling System works on the principle of clipping the InnoCeil profile onto its suspended carrier to secure it in the desired position. This system is available in different sizes and span centres to suit most design requirements. The Aluminium Carrier is available in 60 and 130mm centres. The lightweight suspended Click-On system is perfect for areas where structural loads are critical. The Click-On system makes it easy to install and replace battens.

Refer to CodeMark Certificate no CM70078 or contact The Building Agency phone 09 4152669 

Refer to CodeMark Certificate no CM70078 or contact The Building Agency phone 09 4152669 

Refer to CodeMark Certificate no CM70078 or contact The Building Agency phone 09 4152669 

Please review the Environmental Product Declaration link. In accordance with ISO 14025 and EN15804 for Innowood Wood Composite Products. 

Innwood Cladding is low VOC formaldehyde emission, 100% recyclable composite wood cladding product that is suitable for residential and commercial applications.

The manufacturers of Innowood have been certified with ISO9001:2008 for the quality management system and also has passed through TS16949 automotive quality management system certification in 2005 that provides an effective guarantee for the stability of product quality. Added to the above, the manufacturer has also got the OHSAS18001 Occupational Health and Safety Management System (OHSMS) certification.