Resene Lumbersider Matt Cool Colour by Resene

Resene Lumbersider Matt Cool Colour

Description

Resene Lumbersider Matt CoolColour is a waterborne natural matt look finish based on a tough 100% acrylic resin for a durable finish in all exposed conditions. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up.

Key Features

Available in selected colours from the Resene Total Colour System
Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure
Excellent adhesion to primed and natural substrates, timber, concrete and old paintwork
Excellent as a roof coating where a low sheen finish is required
May be used on surfaces that are to be used for the collection of drinking water
An Eco Choice approved product

Scope of Use

Typical uses: Block and brickwork, Concrete and plaster, Fibre cement, Galvanised iron, Repaints, Stucco/roughcast, Timber and Weatherboards

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period. Dry and recoat times will vary with environmental conditions.
Use Resene Wood Primer (see Data Sheet D40) or Resene TimberLock (see Data Sheet D48) for the first coat where the timber surface is showing signs of deterioration as a result of weathering.
In non-trafficable areas where the coating will be in direct contact with soil or clay, use a semi-gloss waterborne topcoat alternative, such as Resene Sonyx 101 (see Data Sheet D30), for optimal washability.
Do not use on high contact areas such as furniture or where foot traffic is expected.