100% Polyester Masonary Wall & Service Cavity Blanket by Premier Insulation

100% Polyester Masonary Wall & Service Cavity Blanket

Description

100% Polyester Thermal Insulation is a high density material consisting of thermally bonded polyester fibres. Suitable for masonry wall and service cavity insulation in commercial and residential buildings, rolls and segments are available in a range of R-values and widths.

Backed by a 50 year warranty Premier Polyester Insulation is moisture, insect, and vermin resistant. It meets all relevant requirements of the New Zealand Building Code.

These products are manufactured in New Zealand using a minimum of 45% previously recycled fibre sourced from recycled PET. It is free of harmful toxins and chemicals and is designed to be gentle on skin, without causing any itching or irritation.

Format: Roll form and segments
Thickness: 45mm
Standard widths: 580mm (roll) 360/560mm (segments)
R-values: R1.0 and R1.3

Key Features

50 year durability warranty
Manufactured from 100% polyester fibres, using minimum 45% previously recycled fibre (PET plastics)
Moisture and vermin resistant
Non-toxic, non-allergenic, non irritant, soft and safe to touch
Made in NZ and designed for New Zealand buildings

Ranges

Premier 100% Polyester Thermal Insulation

NZ Made

Pre-Consumer Recycled Content

Scope of Use

Premier 100% Polyester Insulation provides thermal insulation for masonry walls and service cavity applications in domestic and commercial buildings.

Segments and rolls are available in:

Thickness: 45mm
Standard widths: 580mm (roll) 360/560mm (segments)
R-values: R1.0 and R1.3

See Data Sheet and Installation Guide for full information.

Contact Premier Insulation for specification and H1 support.

Limitations on Use

Must be installed in accordance with Premier Insulations' installation guide and other literature
Premier Insulation should not be crushed, folded, or compressed

Premier Polyester must be:

Installed and maintained in a dry protected environment
Installed in a building where provisions of NZBC E2 and E3 are met
Installed to the requirements of NZS 4246:2016: Energy Efficiency-Installing bulk thermal Insulation in Residential Building

Statement of Building Code Compliance

Premier Polyester is designed for the thermal and acoustic insulation of buildings in accordance with the New Zealand Building Code (NZBC) H1 Energy Efficiency.

When installed in accordance with the manufacturer's instructions, Premier Polyester will meet or contribute to meeting the following NZBC clauses:

B2 Durability — B2.3.1 (a) — meets this clause will perform for a minimum of 50 years
E3 Internal Moisture — meets this clause
F2 Hazardous Buildings Materials — meets this clause
H1 Energy Efficiency H1.3.1(a) & H1.3.2.E — will support buildings to meet these clauses

Other Performance Attributes

50 year durability warranty
Manufactured from 100% polyester fibres, using minimum 45% previously recycled fibre (from post-consumer recycled PET plastics)
Moisture and vermin resistant
Non-toxic, non-allergenic, non irritant, soft and safe to touch

Documents

BPIR Product Statement: 100% Polyester Insulation

2023

pdf