100% Polyester High-Density Thermal Wall Insulation by Premier Insulation

100% Polyester High-Density Thermal Wall Insulation

Description

100% Polyester Thermal Insulation is a high-density material consisting of thermally bonded polyester fibres. Suitable for wall insulation in commercial and residential buildings, segments are available in a range of R-values, widths and thicknesses.

Backed by a 50 year warranty Premier Polyester Insulation is moisture, insect, and vermin resistant. It has been appraised by BRANZ and meets all relevant requirements of the New Zealand Building Code.

These products are manufactured in New Zealand using a minimum of 45% previously recycled fibre sourced from recycled PET. It is free of harmful toxins and chemicals and is designed to be gentle on skin, without causing any itching or irritation.

Format: Segments
Thickness: 70, 90, & 140mm
Standard widths: 360, 560, & 580mm
R-values range from R1.8 to R3.6

Key Features

50 year durability warranty
BRANZ appraised
Manufactured from 100% polyester fibres, using minimum 45% previously recycled fibre (PET plastics)
Moisture and vermin resistant
Non-toxic, non-allergenic, non irritant, soft and safe to touch
Made in NZ and designed for New Zealand buildings
Select options are Eco Choice Aotearoa Certified — see Data Sheet

Ranges

Premier 100% Polyester Thermal Insulation

Eco Choice Aotearoa

Pre-Consumer Recycled Content

NZ Made

Scope of Use

Premier 100% Polyester Insulation provides thermal insulation for framed or part-framed walls in domestic and commercial buildings.

Segments are friction fitted inside the framing cavity ensuring no gaps

Segments are available in:

Thickness: 70, 90, & 140mm
Standard widths: 360, 560 & 580mm
R-values range from R1.8 to R3.6

See Data Sheet and Installation Guide for full information.

Contact Premier Insulation for specification and H1 support.

Limitations on Use

Must be installed in accordance with Premier Insulations' installation guide and other literature
Premier Insulation should not be crushed, folded, or compressed

Premier Polyester must be:

Installed and maintained in a dry protected environment
Installed in a building where provisions of NZBC E2 and E3 are met
Installed to the requirements of NZS 4246:2016: Energy Efficiency-Installing bulk thermal Insulation in Residential Building

Statement of Building Code Compliance

Premier Polyester is designed for the thermal and acoustic insulation of buildings in accordance with the New Zealand Building Code (NZBC) H1 Energy Efficiency.

When installed in accordance with the manufacturer's instructions, Premier Polyester will meet or contribute to meeting the following NZBC clauses:

B2 Durability — B2.3.1 (a) — meets this clause will perform for a minimum of 50 years
E3 Internal Moisture — meets this clause
F2 Hazardous Buildings Materials — meets this clause
H1 Energy Efficiency H1.3.1(a) & H1.3.2.E — will support buildings to meet these clauses

Other Performance Attributes

50 year durability warranty
BRANZ certified — see Appraisal 1097
Manufactured from 100% polyester fibres, using minimum 45% previously recycled fibre (from post-consumer recycled PET plastics)
Moisture and vermin resistant
Non-toxic, non-allergenic, non irritant, soft and safe to touch
Select options are Eco Choice Aotearoa Certified — see Data Sheet