• Suitable for residential use or small offices
• Suggested number of people: 1-10 

Power and Water Supply Requirements:

• A standard 10amp 3pin power outlet conveniently placed within 1m of  the intended location of the boiler tank. This must be installed by a  qualified electrician
• A standard Cold water supply fitted with a 15mm stop tap situated within easy access of the intended location of the boiler tank. This must be installed by a qualified plumber
• Sink mixer also requires a standard 15mm hot and cold water feeds
• Supply water pressure must not exceed 10,000kpa with pressure regulator installed
• Water supply must be microbiologically safe

Dispenser Mounting

• The sink mixer is easily installed through a standard 35mm hole

• Water supply must be microbiologically safe to drink
• Minimum dynamic water pressure of 250kPa
• Drip tray recommended — as the Schwan appliance is always full of hot water, use of a drip tray is recommended in those applications where any leakage could cause property damage

• Schwan drinking water appliances have been laboratory tested and certified to comply with AS/NZS 60335.1 and AS/NZS 60335.2.15 standards

Warranty

• Two-year repair or replacement warranty for residential installations
• One-year repair or replacement warranty for commercial installations (maximum 6 staff)