Application instructions:

• To remove cement-based product splashes liberally apply undiluted CEM-GON from a spray bottle.
• Keep a constant application of CEM-GON to the reacting surface while CAREFULLY working the solids with a hand-held spatula for 5 to 15 minutes.
• Also, use a blunt broad knife (25-30mm width blade) with plenty of water flowing over the splash whilst lightly shifting any remaining residue.
• Take extra care removing a final layer of cement matrix to avoid surface abrasion. Patience is the key. Rinse well with water.

Caution:

• For age paint systems, take extreme care to avoid further deterioration during all processes.
• If in doubt take photographs or appoint an assessor.
• Protect all other concrete or cement-based products, fibrolite, limestone, marble, plaster, and GIB surfaces.
• It is recommended to do a test patch 1 hour prior to starting.

Storage and Handling:

• It is recommended that CEM-GON be placed in secure storage, labeled and out of reach of children.
• All containers must have securely fastened lids or caps and care must be taken to avoid spills.
• During handling of CEM-GON protect hands and eyes from contact.
• Use plastic sheeting on floors and protect clothing material.