ZINCANODE 402 is recommended for use over abrasive blast cleaned steel surfaces, especially where overcoating is required without special mist or seal coat techniques.

Offers ease of application, high film builds without mud-cracking and exceptional adhesion to field weld areas cleaned by power sanding or power wire brushing.

Specified for use in power generation plants, bulk handling equipment and oil refineries. Also in mining and chemical processes, offshore structures and exposed pipelines.

This is an industrial product designed for use by experienced Protective Coating applicators. Ensure that  the safety precautions on the relevant Material Safety Data Sheets are read and understood before using. The surface to be coated must be totally free of moisture and contaminants. Do not apply at temperatures below 10°C. Do not apply at relative humidity above 85% or when the surface is less than 3°C above the dewpoint. The rate of cure is dependent upon temperature. Where application conditions are outside the parameters stated in this Product Data Sheet, or where any variation to the recommendations within this document are sought, contact a Dulux Consultant for written consent or specifications prior to application. Freshly mixed material must not be added to previously mixed material. Do not apply coatings of a saponifiable nature such as alkyds directly to this zinc rich product.