• Can be applied to plasterboard, brick, cement, bare timber, set plaster, fibrous plaster, plasterglass and metal surfaces
• Apply by roller and brush
• Suitable on interior and exterior surfaces

• Surface will mark easily if applied alone. To protect the finish, apply one thin coat of Berger Jet Dry Natural diluted 1:1 with water 12 hours after the final coat of Copper Effect is applied
• Not suitable for high wear situations
• Not suitable for wet areas or absorbent surfaces
• Avoid exposure to steam, rain and condensation for 48 hours

Maintenance and Care

• Dulux Copper Effect with a sealer coat can be gently cleaned with a damp cloth