Gridlok PeakForm by Comfortech Building Performance Solutions

You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Gridlok PeakForm

Comfortech Building Performance Solutions

All products

Product Enquiries

Description

Gridlok PeakForm is designed and tested to provide consistent bracing to Armstrong Peak Form, Blue Tongue two-way grid ceiling systems and Rondo Rapid Dry Wall Grid System.

Key Features

Simple click fit and screw-off process dramatically reduces time required to complete back bracing
Features the ability to rotate the unit though 360 degrees — minimising service clashes

Ranges

Tracklok Wall and Ceiling Bracing

Scope of Use

For interior application only
Must be installed in accordance with manufacturers specification and within the parameters of AS/NZS1170.5 AS/NZS4219 AS/ NZS2785
Construction outside of available information will require consultation and approval
Architect and/or Structural engineer plus relevant regulatory bodies must approve variations of installation

Limitations on Use

Structural engineer and regulatory body must seismically approve configurations outside of specifications
The unit and/or bracing material must not be used as an anchor point or fixing point by associated trades
All Gridlok units and bracing must be checked after seismic event for signs of wear
Gridlok is not intended to replace ceiling suspension wires, which must be installed as per manufacturers specification
The unit must not be deformed or altered in any way. Tenancy changes requiring new ceiling installation requires new Gridlok units to be installed

Statement of Building Code Compliance

Complies with AS/NZS 2785
Complies with AS/NZS 1170.5
Complies with AS/NZS 4219
Complies with AS/NZS 4600
Complies with NZ Building Code Clause B1 – Structure
Contributes to compliance with NZ Building Code Clause F6 – Visibility in Escape Routes, Clause D1 – Access Routes