In this second part in our series 'A Guide to Structural Actions on Internal Aluminium Partitions', we look at frame deflections and loads that need to be considered when specifying partitions. 

Part 1: Structural considerations for internal aluminium partitions.

Edge cover and edge clearance should be considered at the initial design stage to ensure glazing is installed as per the New Zealand Glazing Code. 

There are lots of configuration options when adding this form of an operable wall, and there are a few things to consider.

Incorporating partition systems into classroom design can help create flexible learning spaces as required by the Ministry of Education.

Following changes to the installation requirements for internal partitions and sliding door systems, TRACKLOK has worked on simplifying the partition bracing process.

Acoustic performance is of key importance to internal glazed partitions and door systems within commercial and educational buildings.

An architect recently approached Potters Interiors expressing concerns of ‘live loads’ in the new multi-floor buildings they were designing. 

Some of our most frequently asked questions relate to limitations of glazed internal partitions.

Recently an architect was looking at a ‘staggered stud’ wall system for an office fitout project – which was recommended by an acoustic technician to achieve a high STC-rated wall. The architect wanted some level of confidence in how this type of system goes together.