• For use in large scale car parks, garages, and commercial areas with regular traffic
• Suitable for outdoor use – IP44
• Can be used by two vehicles simultaneously, splitting the 22kW load into 11kW per vehicle
• Can be used with all manufacturers Type 2 plugs and Type 1 or Type 2 Inlets  

All electrical vehicle charging stations must be installed and connected in accordance with the Work Safe New Zealand Electric Vehicles Charging Safety Guidelines.

• Mennekes Charging Columns, if correctly installed, comply with the Worksafe New Zealand Electric Vehicle Charging Safety Guidelines
• Product complies with IEC 61851-1:2011 for Mode 3 Charging
• New Zealand Supplier Deceleration of Conformity (SDoCs) are available from PDC echarge on request

Suitable for New Zealand voltages and wiring systems:

• 230V 50Hz – 16A to 32A
• 400V 50Hz – 16A to 32A

The Charging Columns are designed and manufactured in Germany by Mennekes.

Over the last 5 years the Charging Columns have been installed all over Europe, Middle east, Scandinavia and are now available in New Zealand.

• UV Stable
• High impact strength 
• Networking Accessories available