PRADIS is designed to be used as;

 - Internal and External Pool Fences

- Wind Breaks

PRADIS can be attached to the following substrates;

 - Concrete

 - Timber

 - Steel

 - Weather boards

PRADIS complies with the New Zealand building code and glazing standards used in conjunction with the following Viridian Glass types and Euroglass systems;

-          Viridian's toughened safety glass

-          SENTRYGLAS® incorporated with a Euroglass System offers a pure clean and clear traditional frameless barrier

PRADIS is bright marine anodised with 10 year warranty.

You can also powder coat PRADIS; there are many powder coat colours to choice from to match your colour scheme.

Rated to be used up to an extra high wind zone (2.13Kpa or less)

The minimum height for a fence to prevent access into a pool area is 1.2m from the finished floor level. Please refer to NZS8500:2006 for design and safety requirements to meet the building code.

This proprietary pool fence system complies with New Zealand Building Code Clauses;

 B1 - Structure and B1/VM1

 B2 - Durability

 F2 - Hazardous Building Materials

E2 - External Moisture (must be designed and installed in accordance with our technical data sheets)

Based on 330N point load from NZS8500:2006, maximum heights for the glass and PRADIS spacing’s are provided within our Technical Data Sheets.

Viridian safety glass options are;

- 15mm toughened safety glass

 - 17.52mm toughened SENTRYGLAS® laminated safety glass (SENTRYGLAS® is a stiff interlayer that complies with 22.4.3 (c) of NZS4223.3:2016)

In the unlikely event of glass failure or to make allowance for the consequence of failure required by clause B1.3.4 of the Building Code B1, Viridian’s toughened SENTRYGLAS® laminated safety glass is recommended to be used.