Commercial Gas Continuous Flow Water Heaters by Rheem

Commercial Gas Continuous Flow Water Heaters

Description

Commercial continuous flow outdoor and indoor models deliver a maximum water temperature of 82°C which is suitable for sanitising applications.

Available in both Natural Gas and ULPG, these units have unique Flame Safe technology which detects abnormal combustion, provides a fault code and shuts the system down. Frost protection is supplied as standard.

Key Features

Can deliver temperatures up to 82°C for sanitising requirements
6 Star energy efficiency
27 Litre per minute continuous hot water delivery
Natural Gas or ULPG Gas models available
Unique Flame Safe technology detects heat exchanger faults and shuts the system down
Frost protection is supplied as standard
84% efficiency
Manifold multiple units for greater volumes

Available in the following model configurations:

CFGWH 872627NFZ | Outdoor Installation | Natural Gas
CFGWH 872627LPZ | Outdoor Installation | ULPG Gas
CFGWH 862627NFZ | Indoor Installation | Natural Gas
CFGWH 862627LPZ | Indoor Installation | ULPG Gas

Ranges

Hot Water Heating for Apartments & Residential Complexes Industrial & Commercial Water Heating Solutions Hot Water Heating for Hospitals and Care Homes

Scope of Use

Commercial applications
Indoor and outdoor applications
Can deliver temperatures up to 82°C for sanitising requirements
Manifold multiple units for greater volumes
Frost protection is standard

Limitations on Use

Choose correct model to suit either indoor or outdoor installation
Gas, water and power are required to operate a Gas Continuous Flow Water Heater
Indoor models must be installed using a certified Rheem Flue System — Always check with local authorities that the installation complies with all regulations applicable in the area