• FloorPly14® structural plywood can be used in all internal applications where a structural rated plywood panel is required.
• For like thicknesses it can be used in lieu of F8 and F11 sheets if required. 
• Applications include gussets, portals and membrane substrates.
• When tongue and grooved (T&G) it can also be used as flooring and roofing. 
• H3.2 treated product can be used in external above ground applications.

Untreated plywood must not be used externally or in high moisture areas. Treated plywood must not be used in contact with the ground. It is not recommended to use smooth face plywood as a cladding - refer to IBuilt CoreClad™ which is manufactured specifically for exterior use. Ensure only compatible materials/fixings are in direct contact with H3 treated plywood. These products are not subject to a warning or ban under section 26 of the Act. 

FloorPly14® structural plywood used in structures designed in accordance with NZS 3603 or as specified in E2/AS1 or NZS 3604, assists in meeting the following provisions of the NZBC:

• B1 Structure: B1.3.1, B1.3.2, B1.3.4(d) FloorPly14® structural plywood is certified under the EWPAA Product Certification Scheme, to AS/NZS2269.0. EWPAA is accredited for product certification by the Joint Accreditation System of Australia and New Zealand (JAS-ANZ).
• B2 Durability: B2.3.1(a) When used and treated as per the requirements of NZS 3602 and AS/NZS 1604, FloorPly14® structural plywood is manufactured to meet the requirements of the NZBC Clause B2 Durability. As such, if the product is used in accordance with good building practices, and treated to the levels prescribed in NZS 3602, it will form part of an Acceptable Solution complying with the requirements of the NZBC (Acceptable Solution B2/AS1, 3.2.1).
• F2 Hazardous Building Materials: F2.3.1