Water supply: A single cold water supply is required. Supply Pressure: 200 – 1000 Kpa Supply Temperature: 5°C – 30°CA single 15mm (1/2") stop-tap with a male thread should be installed in an easily accessible position. 

Power supply: The Billi Alpine models require a standard 10 amp power outlet. It is supplied with a 1 metre flex cord and plug.

Dimensions: 340x180x460mm. No cupboard ventilation required.

Billi Alpine 060:

• Initial cup delivery/suggested number of people: 12
• Delivers 60 cups of chilled and sparkling water per hour

Billi Alpine 120/125:

• Initial cup delivery/suggested number of people: 20
• Delivers 120 cups of chilled and sparkling water per hour

Water supply must be microbiologically safe to drink, with a minimum dynamic water pressure of 250kPa.

Every Billi drinking water appliance is manufactured under a certified quality control system.

The Billi Quadra models have been tested and comply with all required standards including:

• Watermark Licence Number 21525;
• Tested to; AS3498 and AS/NZS4020;
• Victorian Electrical Safety Act 1998 Approval Number CS100600V,
• AS/NZS ISO 9002;
• AS1428 Accessibility Design Requirements;
• Section J6 of the BCA;
• Certificate Number QEC 11627;
• C-Tick approved