3M Safety Window Film by 3M

3M Safety Window Film

Description

Protect tenants and property even on a budget. This basic safety and security film is useful as an increased measure of protection against low force impact situations, general glass fragment retention, spontaneous glass breakage, seismic events, and limited safety glazing situations. These clear, single-layer polyester films rely on thickness to provide additional security benefits. While they do not offer the tear resistance of the Scotchshield Ultra Safety and Security Films, they do help provide additional safety and security.

Key Features

These 100-350 micron(4 to 14 mil) polyester films utilise conventional film grade polyester
Minimises injury to people and protects property from a range of safety concerns, including glass hazards, natural disasters, seismic events and spontaneous breakage
Increases security and provides added protection from smash and grab instances
Significantly blocks the amount of harmful UV rays that cause fading, helping to extend the life of furnishings
Increases anti-spall protection for laminated glass
Combine with 3M Sun Control Films to enjoy enhanced safety, and the benefits of a sun control film, or combine with 3M™ Impact Protection Attachment Systems for extra safety and security

Ranges

3M Safety & Security Window Films

Scope of Use

Basic safety and security film
Recommended for interior use
Suitable for residential and commercial applications

Limitations on Use

For low force impact situations only
Some applications may require the film to be used in conjunction with a 3M Impact Protection Attachment System

Statement of Building Code Compliance

In many cases where glazing requires an upgrade to safety glass, 3M Safety Films can be applied to bring it in line with AS/NZS 2208. In these cases, the application of 3M Safety Film means that the actual glass need not be replaced.

When Safety S70 or Safety S40 is applied to 3mm, 4mm or 6mm annealed glass, the film meets the Grade A impact requirements of AS/NZS 2208:1996

Other Performance Attributes

BRANZ Impact Testing was conducted on 4mm annealed glass with a single layer of 100 micron polyester film with an abrasion resistant coating. This applies to the Safety S40 Film which is constructed from 100 micron polyester with an abrasion resistant coating.

Documents

Data Sheet

pdf