Having specified Fastmount into office spaces and conference rooms previously as an architect, Loi understood that Fastmount could help provide a clean, minimal look on the feature wall, which provides storage for the TV, blankets and pillows, toys and crafts, plus everyday access to purses, backpacks and a hidden tech closet.

With a strict budget that meant that altering the existing structure would be out of the question, the panels were laid out based on the existing conditions of the space, creating a wall space of 5.03 x 2.13m that is split into a 1.4m tall top section and 0.8m tall bottom section, with each panel 0.41m wide.

“The problem we wanted to solve was to have a wall where no hardware or fasteners were exposed. That meant no door pulls, locks, latches, or screws. We thought of a cleat system, but to install a cleat system, we needed to provide a gap at the very top of the wall in order to mount the panels in place. With the VL-03, we were able to avoid that gap and have the entire panel flush up to the ceiling. We used the CP-03 centrepoint tool, which help locate the clips on the backside of the panels and made the entire installation process so much easier,” says Loi.

For areas that have storage, Loi used doors that were laminated using Formica ColorCore2 in White Gloss with concealed hinges and a magnetic catch from Sugatsune. For the panels behind the TV, they were fixed only to the wall using Fastmount’s Very Low Profile Range VL-03 clips.