Resene Waterborne Uracryl 802 by Resene

Resene Waterborne Uracryl 802

Description

Resene Waterborne Uracryl 802 is a waterborne high performance two component semi-gloss finish with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils. The most unusual feature of Resene Waterborne Uracryl 802 is that, unlike other classes of high performance coatings, it looks as good as it protects and is unsurpassed for durability and colour retention.

Key Features

Waterborne formulation
Enables use of high performance urethanes when spray application is difficult or undesirable
Semi-gloss pigmented anti-graffiti coating
Excellent exterior durability

Scope of Use

As a long life semi-gloss topcoat for use over a wide variety of materials where colour retention is required together with excellent durability and very good chemical resistance. Also for marine environments, aluminium, anti graffiti, chemical plants, concrete wall surfaces, dairy factories, fibre cement, food processing plants, GRC panels, hotel and motel rooms, meat works, office blocks, pulp and paper mills, roofing, structural steel, galvanising.

Limitations on Use

In early stages of curing, film may be susceptible to mechanical damage.
Not recommended for immersion use.
Not recommended for direct application to Resene Vinyl Etch, Resene ConcreteSeal 3 in 1 or inorganic zinc silicates such as Resene Zincilate 11.
Do not apply at temperatures below 10ºC and relative humidity greater than 85% or when these conditions exist during drying/curing.