Resene Summit Roof Semi Gloss CoolColour by Resene

Resene Summit Roof Semi Gloss CoolColour

Description

Resene Summit Roof CoolColour is a unique waterborne semi gloss for ease of application and maximum life over well weathered COLORSTEEL, COLORBOND, properly prepared metal surfaces and cementitious surfaces. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up. For maximum CoolColour effect prime with Resene Galvo-Prime (see Data Sheet D402).

Key Features

Colour: Selected Resene Total Colour System
Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure
Good corrosion resistance over metals
Direct to substrate on some surfaces
Excellent adhesion to Resene primers — refer Data Sheet
Acid and alkali resistant — inhibits mould growth
An Eco Choice approved product

Scope of Use

Properly prepared cementitious surfaces
Properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume)
Well weathered COLORBOND or COLORSTEEL.

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
New unweathered COLORSTEEL or COLORBOND must either be lightly sanded, or allowed to undergo direct weathering for a minimum period of one month before application of Resene Summit Roof.
Not normally used on opening sashes and doors (use Resene Enamacryl - see Data Sheet D309).
Disconnect roof downpipes until after the first shower of rain in order to flush away surplus non-toxic wetting agents before the surface is used for the collection of drinking water.
Light colours are recommended for UPVC surfaces as dark shades will cause warping.
Not suitable for roof areas where water ponding occurs.