Resene SpaceCote Flat commercial spray grade by Resene

Resene SpaceCote Flat commercial spray grade

Description

Resene SpaceCote Flat Commercial Spray Grade is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Designed for efficient spray application to enable quicker job completion. Adaptable and suitable for a wide range of projects, including interior wet areas.

Key Features

Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals and The Range.
Flat finish minimises the appearance of minor surface defects.
Very durable, abrasion resistant finish that can be easily cleaned. Ideal for GIB ToughZone areas.
Non-yellowing.
May be used wherever solventborne enamels have traditionally been used.
Resene SpaceCote Flat may be applied over Resene Quick Dry (see Data Sheet D45) or directly over sound, clean old enamel surfaces.
An Eco Choice approved product.

Scope of Use

Bathrooms
Furniture
Kitchens
Laundries
Plywood
Skirtings
Wallboards

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Ensure the correct primers and/or sealers are used.
Due to waxes used in fibre and particle board it is essential that Resene Quick Dry (see Data Sheet D45) is used as the first coat on these substrates.
Although serviceable within 12-48 hours, full print and solvent resistance takes 30 days to develop.