Resene Lumbersider CoolColour by Resene

Resene Lumbersider CoolColour

Description

Resene Lumbersider CoolColour is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up. Resene Lumbersider CoolColour is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up.

Key Features

Available in selected colours from the Resene Total Colour System
Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure
Excellent adhesion to primed and natural substrates, timber, concrete and old paintwork
Excellent as a roof coating where a low sheen finish is required
May be used on surfaces that are to be used for the collection of drinking water
An Ecol Choice approved product

Scope of Use

Typical uses include beams, block and brickwork, concrete and plaster, deckings, fibre and particle board, fibre cement, galvanised iron, repaints, roughcast/stucco, timber and weatherboards.

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Use Resene Wood Primer (see Data Sheet D40) or Resene TimberLock (see Data Sheet D48) for the first coat where the timber surface is showing signs of deterioration, particularly on deckings.
Disconnect roof downpipes until after the first shower of rain in order to flush away surplus non-toxic wetting agents before the surface is used for the collection of drinking water.
Areas coated with this product unmodified may not comply with New Zealand Building Code D1 3.3(d). Refer also to New Zealand Building Code D1 2.0 table 2.