Typical uses: beams, block and brickwork, concrete and plaster, deckings, fibre and particle board, fibre cement, galvanised iron, repaints, stucco / roughcast, timber, wallboards, wallpaper, weatherboards.

• Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
• Use Resene Wood Primer (see Data Sheet D40) or Resene TimberLock (see Data Sheet D48) for the first coat where the timber surface is showing signs of deterioration, particularly on deckings.
• Disconnect roof downpipes until after the first shower of rain in order to flush away surplus non-toxic wetting agents before the surface is used for the collection of drinking water.
• Areas coated with this product unmodified may not comply with New Zealand Building Code D1 3.3(d). Refer also to New Zealand Building Code D1 2.0 table 2.

• An Eco Choice approved product