Resene Hi-Glo CoolColour by Resene

Resene Hi-Glo CoolColour

Resene

All products

Product Enquiries

Description

Resene Hi-Glo CoolColour is based on a unique 100% acrylic emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up.

Key Features

Colour: Selected colours from the Resene Total Colour System.
Reflects heat improving the life of paint finish and substrate and improving interior conditions inside the painted structure.
Excellent intercoat adhesion.
Excellent adhesion to Resene primers — refer Data Sheet.
Outstanding flexibility on timber and steel.
Acid and alkali resistant — inhibits mould growth.
An Eco Choice approved product.

Scope of Use

Aluminium
Block and brickwork
Concrete/plaster
Fibre cement
Galvanised steel roofing and cladding
Particle board
Plywood
Repaints
Roughcast / stucco
Timber
UPVC surfaces
Weatherboards
Zincalume

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Not normally used on opening sashes and doors (use Resene Enamacryl — see Data Sheet D309).
Disconnect roof downpipes until after the first shower of rain in order to flush away surplus non-toxic wetting agents before the surface is used for the collection of drinking water.
Lighter colours are recommended for UPVC surfaces as dark shades may cause warping.
Not suitable for roof areas where water ponding occurs.