Resene Aquapoxy for Flooring by Resene

Resene Aquapoxy for Flooring

Description

Resene Aquapoxy for Flooring is a two pack low VOC waterborne epoxy floor coating. The cured film is glossy and non-yellowing with high surface hardness. It has excellent adhesion and water resistance and is tolerant of application over damp surfaces. The chemical resistance is similar to conventional solventborne epoxies. Resene Aquapoxy for Flooring may be modified with Resene SRG Grit for a non-skid surface, but this will reduce cleanability. An excellent compromise consists of one coat of Resene SRG Grit modified Resene Aquapoxy then one coat of unmodified Resene Aquapoxy.

Key Features

Colour: White and a limited range of chemically resistant pastel colours.
Brushing and rolling properties similar to single pack waterborne paints
Tolerant of application over damp surfaces
Quick tack free and re-coat times giving the potential for multiple coats to be applied in a single day
High surface hardness with excellent resistance to abrasion
Can be steam cleaned or power washed
Excellent resistance to chemicals, solvents and water (see Chemical resistance)
When used as a garage floor coating allow five days cure with good ventilation before driving onto the surface

Scope of Use

Bitumen floors to upgrade solvent resistance
Dairy units and piggeries
Food processing plants
Garage floors
Meat works
Surfaces that require regular high pressure cleaning
Upgrade over sound existing paint for improved protection

Limitations on Use

Application not recommended at temperatures below 10°C or above a R.H. of 85%. Film formation/curing and adhesion may be affected if the coating is applied and cured outside of these conditions.
Recommended for interior use only, like all epoxies, will chalk on direct exposure to the UV.
Will discolour when exposed to hypochlorite (bleach containing) solutions.
Do not apply mixed product beyond stated pot life for a given temperature.