Resene Hi-Glo by Resene

Resene Hi-Glo

Description

Resene Hi-Glo is based on a unique 100% acrylic emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces.

Key Features

Colour: Selected Resene Total Colour System, including BS5252, Multi-Finish, Whites & Neutrals, most Roof Systems colours and The Range.
Excellent intercoat adhesion
Excellent adhesion to Resene primers — refer Data Sheet.
Outstanding flexibility on timber and steel
Acid and alkali resistant — inhibits mould growth
An Environmental Choice approved product

Scope of Use

Aluminium
Block and brickwork
Concrete and plaster
Fibre cement
Galvanised steel roofing and cladding
Particle board
Plywood
Repaints
Roughcast/stucco
Timber
UPVC surfaces
Weatherboards
Zincalume

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Not normally used on opening sashes and doors (use Resene Enamacryl — see Data Sheet D309).
Disconnect roof downpipes until after the first shower of rain in order to flush away surplus non-toxic wetting agents before the surface is used for the collection of drinking water.
Light colours are recommended for UPVC surfaces as dark shades will cause warping.
Not suitable for roof areas where water ponding occurs.