Resene Concrete Primer by Resene

Resene Concrete Primer

Description

Resene Concrete Primer is designed for cementitious surfaces, including all concrete, plaster and surfaces, such as fibre cement to make ready for topcoating. Provides long-term adhesion coupled with exceptional durability even when left uncoated for prolonged periods.

Key Features

Colour: Grey
Excellent adhesion
Outstanding durability
Excellent flow and sanding properties
Designed with a low sheen that allows exceptional topcoat hold-out
An Eco Choice approved product

Scope of Use

Brick and blockwork
Cementitious surfaces
Fibre cement
Formed concrete
Plaster
Precast panels
Tilt slab

Limitations on Use

Do not apply at temperatures below 10°C or when it is liable to drop below 10°C during the drying period.
Not designed as a first coat over weak powdery cementitious surfaces or surfaces where salt staining is likely – use Resene Sureseal (see Data Sheet D42).
Where there is a risk of lime staining on fresh plaster, use Resene Limelock (see Data Sheet D809).
Not recommended for use where severe water staining exists.
Resene Concrete Primer is not recommended over sealants. Best elastomeric sealant performance is achieved by leaving it unpainted.