Resene Colorwood by Resene

Resene Colorwood

Description

Resene Colorwood is an exciting way of treating natural timbers and enhancing the grain. Gives coloured timbers with the see-through look as it allows the natural grain of all timbers to show through.

Key Features

Colour: Standard; range of traditional wood finishes, limed and bright colours.
Ease of application and long wet edge ensures no lap marks.
All colours can be intermixed.
Available in bright colours to give an extra dimension to timber.
May be over-coated with Resene Qristal Clear Polyurethane (see Data Sheet D52) or 48 hours with Resene Polythane (see Data Sheet D53), Resene Qristal ClearFloor (see Data Sheet D506 and Data Sheet D506A) or Resene Aquaclear (see Data Sheet D59). 5. An Environmental Choice approved product.

Scope of Use

Typical uses include cane work, cork, doors, dressed and rough sawn timber, fibre and particle board, furniture, kitset and nursery furniture, panelling, rope, timber (imported and native), timber ceilings and beams and window and door frames.

Limitations on Use

Stir well before use. Allow adequate drying before applying varnish.
Strong colours may be hard to achieve on hardwood and heart timber due to lack of penetration.
Where penetration of the stain is difficult the dry time will be affected.
Resene Colorwood is designed to penetrate the surface and any excess must be wiped off. Failure to do so could result in lower adhesion of the subsequent varnish, especially Resene Polythane (see Data Sheet D53).
Allow 24 hours drying before overcoating with Resene Qristal Clear Polyurethane (see Data Sheet D52) or 48 hours with Resene Polythane (see Data Sheet D53), Resene Qristal ClearFloor (see Data Sheet D506 and Data Sheet D506A) or Resene Aquaclear (see Data Sheet D59).