Resene ArmourZinc 120 by Resene

Resene ArmourZinc 120

Description

Resene ArmourZinc 120 is a tough, abrasion resistant film that bonds strongly to steel, inorganic zinc and existing epoxy surfaces. Zinc content of the coating gives steel cathodic protection if the film is damaged. Rapid drying and topcoating allows for early handling of steel when used as shop primer or on site applications.

Key Features

Colour: Grey / green
More tolerant of imperfect surface preparation than inorganic zinc silicates
Will cure satisfactorily at low humidities and in windy conditions
Suitable for repair of welded joints on zinc coated surfaces where abrasive blasting is precluded
Fast topcoat potential

Scope of Use

Fertiliser plants
Gas plants
Hydro-electric installations
Marine
Oil refineries
Petro-chemical plants
Power plants
Preconstruction or touch-up primer for inorganic zinc
Pulp and paper mills
Tanklining (when suitably topcoated) for mineral oils, aromatic / aliphatic solvents, vegetable oils

Limitations on Use

If air or surface temperatures exceed 35°C at application consult manufacturer for thinning recommendations.
Full curing, air and surface temperatures must be above 10°C.
Must not be allowed to come into contact with acid or alkaline solutions outside pH range indicated above.
Overcoating systems must be non-saponifiable.

Documents

Data Sheet

URL