You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

Resene Armourcote 608
Description

Resene Armourcote 608 is a high gloss, fast dry spraying enamel based on a modified polyester resin. Durability, colour and gloss retention is typical of high quality gloss enamels.

Key Features
  • Colour: White, selected BS2660, BS5252 and Resene Total Colour System
  • Fast drying
  • May be applied over a variety of suitably prepared substrates
  • An economical topcoat for improvement of the aesthetic appearance of epoxies in exterior situation
Categories
Protective Coatings
NZ Made
NZ Made
Scope of Use

Most suitably prepared exterior and interior surfaces.

Limitations on Use
  • Ensure correct primer is used
  • Drying time can be affected by low temperature, high humidity and wet film thickness
  • Ultimate harness, re-coatability and solvent resistance develops over 7-10 days
  • When applied over zinc rich primers a non-saponifable barrier coat must be applied
  • Not recommended for prolonged or continuous immersion in fresh or saltwater
  • Suitable for brush application on small areas only
Documents
CAD/PDF (link to page on supplier website)
Data Sheet
Material Safety Data Sheet
Environmental Information
Maintenance Instructions
Warranty
Colour Range
Order Samples
Resene Problem Solving Guide
Resene Specifiers Mailing List
Videos: How to Paint Like a Professional

Colours, coatings, wood stains, and paints for exterior and interior house painting, plus commercial, industrial and marine painting applications.

Product Enquiries

News from Resene

Shimmer by the Roll: New Metallic Wallpaper by Resene NEW
Reinvented Community Centre Wins Resene Total Colour Awards 2023
Sharpen your Skills with MasterStroke by Resene

Posts by Colin Gooch

See All

Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.