Exterior film is engineered specifically for the below:

• Building facades
• Claddings
• Panels
• Window frames

And smooth substrates with high-energy surfaces such as:

• ACP panel
• Anodized or powder-coated aluminium
• Steel
• HPL
• PVC/U-PVC

Although the film is suitable for a variety of substrates, it is not recommended for low-energy surfaces such as:

• Untreated Wood
• Mineral board / panel
• Cement / concrete / mortar
• Real stone
• Poorly adhered paint

Surfaces, whether existing, new, or renovated, are often affected by various contaminants such as dust, silicon, grease, paint stains, glue residues, and welding spots. Contaminants can compromise the bonding of the film, necessitating thorough cleaning and assessment before application. Prior to application, it is essential to conduct an adhesion test to ensure compatibility with the substrate. Apply a small piece of film to the surface to evaluate adhesion and determine the necessary preparations for proper bonding. For building facades or large areas, conduct adhesion tests on various parts to check different zones and ensure there are no areas with poor adhesion. Address any issues identified during testing, such as weak paint adhesion or surface contamination, before proceeding with film application.

• Certificate of Guarantee is available on request.

• Up to 12 years limited warranty