Intergrain UltraDeck Slip Resistant by Intergrain

Intergrain UltraDeck Slip Resistant

Intergrain

All products

INFO 4 Intergrain UltraDeck Slip Resistant Decking Oil

INFO 5 Intergrain UltraDeck Slip Resistant Decking Oil

INFO 6 Intergrain UltraDeck Slip Resistant Decking Oil

Product Enquiries

Description

Intergrain UltraDeck Slip Resistant Decking Oil is a long lasting, matt water based oil for decking and exterior timber. UltraDeck Slip Resistant contains added UltraGrip for a subtle textured finish that reduces the tendency for decking and timber walkways to become slippery when wet

Coverage: 10m²/L
Recoat Time: 3 Hours
Sheen: Matt
Sizes: 4L

The result is timber that stays protected and looking fresh for significantly longer than traditional decking oils. UltraDeck Slip Resistant decking oil is available in a lightly pigmented natural colour or with mild timber tones to highlight the characteristics of popular timber species.

UltraDeck Slip Resistant decking oil is fast drying, allowing two coats to be applied in one day, and will weather naturally, without risk of flaking, blistering and peeling.

Key Features

Contains added Intergrain UltraGrip for a subtle textured finish
Lasts 3x longer than traditional oil based decking oils
Will never flake, blister, or peel
UV & weather resistant
Will weather naturally, without risk of blistering flaking and peeling
Reduces the tendency for decking and exterior timber walkways to become slippery when wet
Formula allows for high traffic
Transparent oil/natural looking finish
Available in a lightly pigmented natural colour or with mild timber tones to highlight the characteristics of popular timber species
Fast recoat time allows for two coats to be applied in one day
Can coat after rain while timber is still damp

Ranges

Exterior Oils

Scope of Use

On exterior timber decking and walkways

Limitations on Use

Do not apply to hot surfaces or those in direct sunlight, as doing so may result in difficult application, poor adhesion and blistering.

Do not apply in temperatures above 35°C or below 10°C or if rain or dew is expected within 4 hours of application. Lightly dampening timber before applying product will ease application in temperatures above 28°C

Other Performance Attributes

Maintenance:

Conduct a routine 12 monthly maintenance inspection.

Best protection of the timber and ease of maintenance is ensured if Intergrain UltraDeck Slip Resistant is recoated before deterioration of the coating and timber underneath occurs or when slip resistance is reduced. To refresh timber with significant signs of weathering, greying or mould, prepare the surface as per the directions under SURFACE PREPARATION.

Documents

UltraDeck Slip Resistant Product Data Sheet

pdf