• Thermal insulation for insulating commercial and industrial roofs
• Blanket/roll

NZBC Compliance: When installed in accordance with the manufacturer's instructions, GreenStuf will satisfy the 50 year durability clause NZBC B2.3.1 (a). GreenStuf meets the relevant clauses of NZBC E3 Internal Moisture, F2 Hazardous Building Materials, and will contribute to meeting H1 Energy Efficiency.

Acoustic Performance: GreenStuf insulation will assist in reducing airborne sound (including rain drum) by absorbing reverberant noise. Actual performance will vary depending on design, materials and installation. For further information on acoustic design please contact your Autex account manager.

Fire Regulations: GreenStuf insulation may not be suitable for all applications, as stipulated in the NZBC. Please consult a fire engineer when specifying GreenStuf insulation or contact your Autex account manager for further information.

Durability: GreenStuf has a 50 Year Durability Warranty.

Moisture: GreenStuf is not affected by moisture. Exposure to an atmosphere of 50°C at 90% relative humidity for four days showed moisture absorption by weight of less than 0.03%.

Fire ratings: ISO 9705: 1993 Classification: Group 1-S Smoke Production Rate: <5.0m2/s As required by NZBC C/VM2 FAR 4045-2 issued 8th October, 2013 AS1530.3 Ignitability Index (0-20) 0 Heat Evolved Index (0-10) 0 Spread of Flame Index (0-10) 0 Smoke Developed Index (0-10) 3 APL Report 98055 (Test conducted on GreenStuf Thermal Insulation) IEC 60695-11-5 (Downlight Fire Test Standard) GreenStuf has been tested and assessed as complying with IEC 60695-11-5 Needle-flame Test.

Foil Facings: GreenStuf BIB is supplied as standard without a foil face as the product in standard installations is fully self-supporting and does not require the additional stability of a foil. Where a vapour barrier or foil is required please discuss your requirements with your Autex account manager.

Hazardous Building Materials: GreenStuf is non-hazardous.

VOC Emission Safe: VOC concentration: 0.01 mg/m³ (7 days). GECA/GreenGuard Limit: 0.25 mg/m³ (7 days). Cetec Pty Ltd (Report: RCV080408)

Non-Corrosive: GreenStuf polyester is considered non-corrosive based on AS/NZS 4859.1 Standard for insulation.

Non-Toxic, Non-Allergenic, Non-Irritant: There are no known hazards with the use or handling of GreenStuf polyester.

Vermin: GreenStuf is naturally resistant to insect and vermin attack. 

GreenStuf Building Insulation Blanket (BIB) is manufactured using 100% polyester fibre and contains a minimum of 82% previously recycled fibre content (from PET plastic). All GreenStuf products are manufactured under Autex’s Zero Waste Programme where all manufacturing waste is recycled back into the production process. GreenStuf products are Global GreenTag GreenRate Level A certified and can be used to contribute to Green Star and Homestar accreditation. GreenStuf is also Declare certified to be Red List chemical free and can be used in Living Building Challenge projects. For more information, please contact your Autex account manager, or visit our website greenstuf.co.nz. Please refer to your local recycling centres for drop off and collection services.