You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
PROMASEAL®-AG Acrylic Intumescent Sealant
Description

PROMASEAL®-AG Acrylic Intumescent Sealant is a water based sealant designed for use with copper pipes with combustible and non-combustible insulation as well as with selected plastic pipes to prevent the spread of smoke, fire and heat.

  • Supplied in 300ml cartridges; grey
Key Features
  • Approved for Hebel walls along with 60 & 120 minute F.R Plasterboard
  • Approved for copper pair coils with fire rated and non fire rated insulation
  • Approved for selected PEX pipes
  • No backing required in the penetration
  • Tested to AS1530.4 & AS4072.1
  • Expands when heat is applied to it filling the penetration and taking up the space of any service or insulation that melts leaving an opening.
  • It can be painted after 24 hours of installation , skin formation occurs within 15 mins on a typical 20oC day. Humidity of greater than 65% will result in extended drying time.
  • Substrate must be free of oil, grease and dust before installation
Categories
Fire Insulation
Ranges
Promat
Scope of Use
  • Suitable for fire stopping and passive fire protection in commercial interiors
  • Approved for Hebel walls along with 60 & 120 minute F.R Plasterboard
  • Approved for copper pair coils with fire rated and non fire rated insulation
  • Approved for selected PEX pipes
  • No backing required in the penetration
  • Tested to AS1530.4 & AS4072.1
Limitations on Use
  • It can be painted after 24 hours of installation, skin formation occurs within 15 mins on a typical 20°C day
  • Humidity of greater than 65% will result in extended drying time
  • Substrate must be free of oil, grease and dust before installation; clean tools with water after use
Other Performance Attributes
  • Tested to AS1530.4 & AS4072.1
Documents
PROMASEAL®-AG Acrylic Intumescent Sealant Cetificate
PROMASEAL®-AG Acrylic Intumescent Sealant

Comfortech Building Performance Solutions® is a business that engineers’ solutions for comfort, climate, and protection.

Product Enquiries

News from Comfortech Building Performance Solutions

Comfortech Committed to Keeping Walls Covered Through Secondary Layer Insulation Wall Solution
Comfortech Deliver Market-Leading Solution for Residential Walls Through Secondary Insulation Layer Wall Solution NEW
Wall to Ceiling Comfort with Dbsorb Acoustic Solutions

Posts by Comfortech Technical

See All


Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.