PROMASEAL A Acrylic Sealant by Comfortech Building Performance Solutions

You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

PROMASEAL A Acrylic Sealant

Comfortech Building Performance Solutions

All products

Product Enquiries

Description

PROMASEAL®-A Acrylic Sealant is a water based acrylic sealant. The advantage of this environmentally friendly water based sealant is in making post installation and site clean up easier. If installed correctly, once cured PROMASEAL®-A Acrylic Sealant should not crack and it can be simply overpainted. It has a good resistance to water characteristics and some movement capabilities.

Supplied in 300ml cartridges and 600ml foil sausages

Key Features

Low VOC
Water based for easy clean up
Required for use with most other Promat systems
Up to FRR -/180/180 for penetration seals
Up to FRR -/240/240 for control joint protection
Tested to AS1530.4 & AS4072.1
The sealant should not be used where continuous water immersion is likely.
The sealant is not recommended for use in wet or damp areas where ambient humidity is consistently high, e.g. bathrooms.
The sealant is not recommended for use in around services where high movement may be expected. It is not recommended for use around services that require more than ±15% movement.

Ranges

Promat

Scope of Use

Suitable for fire stopping and passive fire protection in commercial interiors
Required for use with most other Promat systems

Limitations on Use

PROMASEAL®-A Acrylic Sealant is water resistant once fully cured. However, it is not recommended for external use.

The sealant should not be used where continuous water immersion is likely.
The sealant is not recommended for use in wet or damp areas where ambient humidity is consistently high, e.g. bathrooms.
The sealant is not recommended for use in around services where high movement may be expected. It is not recommended for use around services that require more than ±15% movement.