Elevating Energy Efficiency with Knauf’s H1-Compliant Glasswool Insulation Products

In New Zealand's evolving construction landscape¹, meeting H1 energy efficiency regulations is critical for residential and small buildings under 300m². H1 Energy Efficiency represents the most significant advancements in energy efficiency witnessed in the past decade. As architects and designers navigate these requirements, selecting the right insulation product becomes paramount.

Knauf Insulation’s R7.0 glasswool ceiling batt offers an effective solution designed specifically for H1 compliance. With a thermal resistance of R7.0, this single-layer glasswool ceiling batt enhances the energy efficiency of residential projects, ensuring indoor comfort year-round. The innovative design of the R7.0 batt allows for continuous coverage, creating a seamless layer that reduces thermal bridging. This is essential for maximising insulation effectiveness and maintaining compliance with H1 standards.

One of the standout features of Knauf Insulation’s R7.0 glasswool ceiling batt is its efficiency during installation. Unlike traditional double-layer systems, the R7.0 ceiling batts are designed so they do not require notching which will in turn reduce the installation time by up to 40%. This efficiency translates to significant time and cost savings for installers, allowing for quicker project completions without sacrificing quality.

Furthermore, the durability of the R7.0 ceiling batt is enhanced by DriTherm Technology, a silicone treatment, which enhances the product's moisture resistance. This feature is particularly beneficial in New Zealand's varied climate, where moisture management is crucial to maintaining the integrity of building structures.

The R7.0 glasswool ceiling batt has also been certified for use in Kāinga Ora homes, reinforcing its compliance credentials and suitability for government projects. Specifiers can confidently recommend this product, knowing it meets the rigorous standards required in contemporary construction.

As New Zealand continues to prioritise energy efficiency in residential buildings, the need for compliant insulation solutions becomes increasingly vital. Knauf Insulation’s R7.0 glasswool ceiling batt not only meets H1 regulations but also streamlines the installation process, providing a robust and effective solution for specifiers aiming to enhance their projects' comfort and energy performance. For those looking to deliver high-quality, compliant buildings, Knauf Insulation’s R7.0 ceiling batt is a strategic choice that promises both efficiency and reliability.

Check out the new home of Knauf Insulation at knauf.com and discover the full range of H1 compliant glasswool insulation products.

Reference
1 Construction industry in New Zealand - statistics & facts | Statista

ecoinsulation Thermal Ceiling Insulation

Knauf Insulation

View Product

ecoinsulation Thermal Ceiling insulation with DriTherm technology is made using a silicone treatment that is added to the during manufacture to upgrade the moisture resistance of the glasswool insulation, and provide guaranteed water resistance for 50 years.

Green Tag Certified

Pre-Consumer Recycled Content

ecoinsulation glasswool has been appraised by BRANZ as a thermal insulation material for framed or part-framed ceilings and roofs of domestic and commercial buildings
The insulation is pre-cut to suit a wide range of thermal insulation requirements and framing set-outs
Comes in a range of R-Values — see Product Schedule

AS/NZS 4859.1 Materials used in the Thermal Insulation of Buildings

In the opinion of BRANZ, ecoinsulation glasswool if designed, used, installed and maintained in accordance with the statements and conditions of this Appraisal, will meet or contribute to
meeting the following provisions of the NZBC:

Clause B2 DURABILITY: Performance B2.3.1(a) not less than 50 years, and B2.3.2. ecoinsulation glasswool insulation products will meet these requirements.
Clause C3 PROTECTION FROM FIRE: Performance C3.7(a). ecoinsulation glasswool insulation products are not combustible building materials and will contribute to meeting this requirement
Clause E3 INTERNAL MOISTURE: Performance E3.3.1. ecoinsulation glasswool insulation products will contribute to meeting this requirement
Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1. ecoinsulation glasswool insulation products do not present a health hazard to people
Clause H1 ENERGY EFFICIENCY: Performance H1.3.1(a) and H1.3.2E. ecoinsulation glasswool insulation products will contribute to meeting these requirements

See BRANZ Appraisal 1049 for full information.

BRANZ Appraised

CodeMark

Earthwool glasswool insulation: Ceiling Batts

Knauf Insulation

View Product

The Earthwool® glasswool insulation: ceiling batt range includes a selection of R-values to provide builders, designers, installers the opportunity to choose the best thermal performance for their project.

Declare LBC Red List Free

Green Tag Certified

Pre-Consumer Recycled Content

Earthwool® glasswool insulation has been appraised by BRANZ as a thermal insulation material for framed or part-framed walls, ceilings and roofs of domestic and commercial buildings
The insulation is pre-cut to suit a wide range of thermal insulation requirements and framing set-outs.
Comes in a range of R-values — see Product Data Sheet

AS/NZS 4859.1: 2018 Materials used in the Thermal Insulation of Buildings.

In the opinion of BRANZ, Earthwool® glasswool Insulation if designed, used, installed and maintained in accordance with the statements and conditions of this Appraisal, will meet or contribute to meeting the following provisions of the NZBC:

Clause B2 DURABILITY: Performance B2.3.1 (a) not less than 50 years and B2.3.1 (b) 15 years
Earthwool glasswool insulation will meet these requirements. See Paragraph 8.1
Clause E3 INTERNAL MOISTURE: Performance E3.3.1
Earthwool glasswool insulation will contribute to meeting this requirement. See Paragraphs 13.1 and 13.2
Clause F2 HAZARDOUS BUILDING MATERIALS: Performance F2.3.1
Earthwool glasswool insulation meets this requirement and will not present a health hazard to people
Clause H1 ENERGY EFFICIENCY: Performance H1.3.1 (a) and H1.3.2
Earthwool glasswool insulation will contribute to meeting this requirement. See Paragraphs 14.1 and 14.2

See BRANZ Appraisal 648 for full information.

BRANZ Appraised

CodeMark

Categories

Popular Products

Popular Brands

Features

Sections

This Month

Caesarstone: Redefining Surface Excellence with Crystalline Silica Free Formulations

NZ's Largest Mass Timber Office Building: The Sustainable Timber Engineering Behind 90 Devonport Rd

Terra Lana Insulation for a World-Leading Hospital Targeting Zero Carbon Certification

SECTIONS

Exploring Options for Self-certification of Building Work

Complaints Not Upheld

From Windows to Warm Roofs: How Can We Make the New Insulation Standards Work?