PRADIS is designed to be used as;

 - Internal and External Pool Fences

- Wind Breaks

PRADIS can be attached to the following substrates;

 - Concrete

 - Timber

 - Steel

 - Weather boards

PRADIS complies with the New Zealand building code and glazing standards used in conjunction with the following Viridian Glass types and Euroglass systems;

-          Viridian's toughened safety glass

-          SENTRYGLAS® incorporated with a Euroglass System offers a pure clean and clear traditional frameless barrier

PRADIS is bright marine anodised with 10 year warranty.

You can also powder coat PRADIS; there are many powder coat colours to choice from to match your colour scheme.

Rated to be used up to a high wind zone (1.76Kpa or less)

The minimum height for a fence to prevent access into a pool area is 1.2m from the finished floor level. Please refer to NZS8500:2006 for design and safety requirements to meet the building code.

This proprietary pool fence system complies with New Zealand Building Code Clauses;

 B1 - Structure and B1/VM1

 B2 - Durability

 F2 - Hazardous Building Materials

E2 - External Moisture (must be designed and installed in accordance with our technical data sheets)

 Based on 330N point load from NZS8500:2006, maximum heights for the glass and PRADIS spacing’s are provided within our Technical Data Sheets.

Viridian safety glass options are;

- 12mm toughened safety glass

 - 13.52mm toughened SENTRYGLAS® laminated safety glass (SENTRYGLAS® is a stiff interlayer that complies with 22.4.3 (c) of NZS4223.3:2016)

In the unlikely event of glass failure or to make allowance for the consequence of failure required by clause B1.3.4 of the Building Code B1, Viridian’s toughened SENTRYGLAS® laminated safety glass is recommended to be used.