You are using an outdated browser version not supported by this website.
Click here to upgrade your browser

InteriorInterior
EQUITONE [inspira] new range High Density Fibre Cement
Description

EQUITONE [inspira] is a high-density fibre cement panel with a digital printed surface covered with a UV finishing. The surface finish is smooth, hard, matte and resistant to UV radiation. The UV finishing provides a hard, dirt resistant surface finish with a high abrasion resistance and a permanent and durable anti-graffiti surface.

Available in the following decors:

  • Marble/Stone
  • Concrete
  • Wood
  • Rust
  • Designs: Coral Glow, Coral Trace, Leaves, Sine Wave, Carved Wood

Panel Size:

  • 2500 mm x 1250 mm x 8 mm
  • 3100 mm x 1250 mm x 8 mm
Key Features

Designed for strength and reliability, EQUITONE panels, seamlessly installed on the facade using a rear-ventilated curtain system, offer:

  • Over 50 years of longevity
  • Anti-graffiti protection*
  • Resistance to extreme temperatures and frost
  • Exceptional water resistance
  • Chemical resistance
  • Complies with AS/NZS2908.2
  • Classified as Type 'A' cladding material in accordance with the Verification Method C/VM2 of the NZBC
  • Classified as Group 1-S material for internal wall and ceiling linings as per NZBC.
Scope of Use
  • The EQUITONE Facade System consists of EQUITONE Facade panels in numerous profiles/finishes, fixed to either timber battens or metal support frame with face or hidden fixings using EQUITONE proprietary or recommended fasteners, flashing and profiles. The EQUITONE Facade System may be installed with either a flexible (pliable) or rigid weather barrier.
  • The EQUITONE Facade System may be used as an external wall cladding and/or as an internal wall lining for all buildings within the scope of limitations. Structural analysis report for non-cyclonic, cyclonic wind pressure span tables for exterior walls
  • EQUITONE [inspira] tested in accordance to ISO5660.1-2015 Reaction to Fire Test (Cone Calorimeter Method). Also tested in accordance ISO5660.1 — 2015 Fire Group Number Assessment, achieved a Group 1s rating
  • Installed in all Exposure Zones (except for microclimates) as defined in NZS 3604:2011 paragraph 4.2.4, provided all fasteners and fixings are in accordance with section 4 of NZS 3604:2011. Aluminium window and door joinery must meet the requirements of NZS 4211:2008 including Amendment 1 installed with suitable vertical jambs and horizontal heads and sills flashings.
Limitations on Use
  • Installed in all Exposure Zones (except for microclimates) as defined in NZS 3604:2011 paragraph 4.2.4, provided all fasteners and fixings are in accordance with section 4 of NZS 3604:2011.
  • Aluminium window and door joinery must meet the requirements of NZS 4211:2008 including Amendment 1 installed with suitable vertical jambs and horizontal heads and sills flashings.
Statement of Building Code Compliance
  • Structure — B1: B1.3.1, B1.3.2, B1.3.4, for the relevant conditions B1.3.3 (a, h, j, q) Structural analysis report for non-cyclonic, cyclonic wind pressure span tables for exterior walls, soffits. Seismic tested in accordance with AS/NZS4284:2008 BRANZ EM7
  • Durability — B2: Clause B2.3.1 (b), When installed and maintained in accordance with the specifications and installation instructions as defined in the Technical Literature, the EQUITONE [inspira] has an expected serviceable life of greater than 15 years. The Environmental Product Declaration (EPD) document indicates that the EQUITONE cladding to have a estimate service life of 50 years.
  • Fire Performance — C3: Clause C3.4(a), C3.5 & C3.7 (a) EQUITONE [inspira] tested in accordance to ISO5660.1-2015 Reaction to Fire Test (Cone Calorimeter Method), EQUITONE [inspira] Tested in accordance ISO5660.1 - 2015 Fire Group Number Assessment, achieved a Group 1s rating
  • External Moisture — E2: Clause E2.3.2, E2.3.5 & E2.3.7 — EQUITONE [inspira] external wall assemblies and their abilities have been independently assessed to fulfil the requirements of the New Zealand Building Code Clause E2 External Moisture. 
  • Hazardous Building Materials — F2: Clause F2.3.1: The EQUITONE [inspira] meets this requirement and will not present a health hazard when managed as detailed in the EQUITONE System Design, Specification, and Installation Guides and Work Safe Guidelines.
In-Service History

Since 2018. ETEX (manufacturer) was founded in 1905.

Other Performance Attributes

EQUITONE takes the lead in environmental excellence, offering a sustainable framework that will contribute to the success of future projects:

  • Cradle to Cradle Certified® Bronze**
  • 100% recyclable
  • Low material usage/m²
  • Modular design
  • Lightweight construction
  • Ease of disassembly
  • Low maintenance
  • No harmful gas emissions
Documents
EQUITONE [inspira] — BPIR Building Products Information Requirements

Class 1 v1

EQUITONE [inspira] Material Information Sheet

MIS

EQUITONE [inspira] Material Safety Data Sheet

MSD

EQUITONE [inspira] B1 Structural Engineer Report
EQUITONE [inspira] B2 Durability Engineer Compliance Statement
EQUITONE [inspira] C3 - Fire ISO56601.1 Group 1s Rating Certificate
EQUITONE [inspira] C3 - Fire ISO56601.1 test
EQUITONE [inspira] E2 External Moisture Engineer Compliance Statement
EQUITONE Brochure
Additional Information

Importer and distributors of shingle roofing, cladding, screening and lining across New Zealand, with brands including Owens Corning, AliClad, Innowood, Equitone, Frontek, and Alucobond.

Product Enquiries

News from The Building Agency

Equitone for the Education Sector
EQUITONE Brings Sustainable, Creative and Low Maintenance Solutions to the Education Sector
Te Puhinui: How Innoceil Merges Extraordinary and Compliance in Public Accessways
Get a free weekly digest of essential news

New and updated architectural products, design solutions, inspiration, technical advice and more when you sign up for EBOSS.