Low Pressure Copper Wetback Electric Hot Water Cylinders by Rheem

Low Pressure Copper Wetback Electric Hot Water Cylinders

Description

This traditional copper lined cylinder can be connected to a wetback and comes in a wide range of sizes. Models range from 135 litre to 270 litre capacity. Choice of 3 inlets. A range of sizes and configurations to suit the needs of most New Zealand homes looking to install or replace a wetback water heater.

Key Features

Low pressure use, rated for a maximum of 76kPa water pressure
Lightweight and easy to install
Can be fitted to many wood, pellet fire or burner systems
Galvanised steel exterior
Solstice Green insulation helps maintain the optimum water temperature, reducing energy use and providing economic and environmental benefits
Designed and manufactured in New Zealand
5 year domestic cylinder warranty

Available in the following model configurations:

WETBACK 18513513 | 135L | 1465 x 460mm | 2.0kW
WETBACK 16513513 | 135L | 1140 x 510mm | 2.0kW
WETBACK 14513513 | 135L | 955 x 560mm | 2.0kW
WETBACK 16518015 | 180L | 1510 x 510mm | 3.0kW
WETBACK 54518015 | 180L | 1355 x 540mm | 3.0kW
WETBACK 54518013 | 180L | 1355 x 540mm | 2.0kW
WETBACK 14518015 | 180L | 1220 x 560mm | 3.0kW
WETBACK 14418015 | 180L | 1220 x 560mm | 3.0kW
WETBACK 14318015 | 180L | 1220 x 560mm | 3.0kW
WETBACK 12518015 | 180L | 1020 x 610mm | 3.0kW
WETBACK 16522515 | 225L | 1520 x 560mm | 3.0kW
WETBACK 14522515 | 225L | 1250 x 610mm | 3.0kW
WETBACK 16527015 | 270L | 1800 x 560mm | 3.0kW
WETBACK 14527015 | 270L | 1465 x 610mm | 3.0kW

Ranges

Hot Water Heating for the Home Domestic Electric Water Heaters

NZ Made

Scope of Use

Most commonly used in domestic dwellings
Good choice for like-for-like replacement
Rated for a maximum of 76kPa water pressure with the heavy head models with 120kPa
Three inlets from which to choose from: bottom, left and right-hand sides
Indoor installation
Range of models available to suit between 1–5 people in moderate climates

Limitations on Use

Not suitable for outdoor installation
Many councils have clean air requirements in place for urban areas. Check which fires and wetbacks can be installed with the local city, district or regional council

Due to localised water conditions, Rheem New Zealand advise that our Low Pressure Copper hot water cylinders are not suitable for installation in the postcode areas of 4120 and 4122 in the Hastings district. These cylinders are outside of our Rheem Warranty water chemistry terms based upon recent testing and may result in subsequent pinhole corrosion. We recommend the use of Vitreous Enamel and Stainless Steel cylinders for this area.