• Suitable for residential use or small offices
• Suggested number of people: 1-10 

Power and Water Supply Requirements:

• A standard 10amp 3pin power outlet conveniently placed within 1m of the intended location of the boiler tank. This must be installed by a qualified electrician
• A standard cold water supply fitted with a 15mm stop tap situated within easy access of the intended location of the boiler tank. This must be installed by a qualified plumber
• Supply water pressure must not exceed 10,000kpa with pressure regulator installed
• Water supply must be microbiologically safe

Mounting/installation:

• The top-mounted dispenser: installed through a standard 35mm hole
• Unit dimensions: 416mm high x 258mm wide x 326mm deep

• Water supply must be microbiologically safe. 
• Minimum dynamic water pressure of 250kPa
• Drip tray recommended — as the Schwan appliance is always full of hot water, use of a drip tray is recommended in those applications where any leakage could cause property damage
• Ventilation — requires cupboard ventilation and adequate air flow for correct operation. See Data Sheet for suggested ventilation

Warranty

• Two-year repair or replacement warranty for residential installations
• One-year repair or replacement warranty for commercial installations