You are using an outdated browser version not supported by this website.
Click here to upgrade your browser
SUPER-STICK is a flexible flashing tape used around framed joinery openings as a secondary weather resistant barrier. SUPER-STICK is installed into and around the framed joinery opening over the building wrap and exposed frame to cover both the face and edge of the opening framing. SUPER-STICK is also used at joinery heads to seal flashing up-stands to the building wrap.
SUPER-STICK has been appraised as a flexible flashing system for use around window and door joinery openings for buildings within the following scope:
The scope limitations of NZBC Acceptable Solution E2/AS1, with regards to building height and floor plan area; and, constructed with steel framing complying with the NZBC; and, with a risk score of 0-20, calculated in accordance with NZBC Acceptable Solution E2/AS1, Table 2; and, with wall cladding systems covered by a valid BRANZ Appraisal that specifies a flexible flashing system; and, with wall underlays compatible with the flashing tape and steel frame; and, situated in NZS 3604 Wind Zones up to, and including, 'Extra High'.
Note: Marshall Innovations Ltd offer SUPER-STICK as a jointing and flashing tape for use with rigid air barrier systems that do not require a flexible wall underlay, but this aspect is outside the scope of this Appraisal. Contact the rigid air barrier system proprietor for system details including recommended jointing and flashing tapes.
In the opinion of BRANZ, SUPER-STICK, if designed, used, installed and maintained in accordance with the statements and conditions of Appraisal No. 846 (2013), will meet or contribute to meeting the following provisions of the NZBC:
Marshall Innovations provide weathertight solutions from below ground to pre-cladding, also offering deck jack systems and mass timber fixings and connectors.
Product Enquiries