• COLORSTEEL® Matte is suitable for a wide range of roll-formed roof and wall claddings, rainwater accessories and general building products

Please refer to COLORTSEEL®'s Environmental Categories & Warranty Guide for further information on where to use each product.

COLORSTEEL® MATTE products are not recommended for the following applications:

• Intensive animal shelters, where the build-up of alkaline fumes may occur
• Swimming Pools, and other structures with continually wet internal environments
• Buildings with harsh internal environments such as galvanising plants, tanneries and meat works
• Fertiliser works
• Embedded in concrete
• In contact with soil, bark or similar
• Geothermal areas

Before using COLORSTEEL® MATTE products in these environments please consult one of our Business Development Managers for a recommendation.

Copper or brass pipes must not be allowed to discharge onto or come into contact with COLORSTEEL® pre-painted steel products. The use of other materials in proximity to COLORSTEEL® MATTE must be carefully considered — the COLORSTEEL® Incompatible Materials bulletin should be used as reference.

Mixing with other brands of pre-painted materials on the same building is not recommended.

• COLORSTEEL Maxam® is Product Type 6 consistent with AS/NZS 2728:2013
• Tolerances are consistent with the requirements of AS/NZS 1365:1996

COLORSTEEL® Matte is manufactured by New Zealand Steel Ltd. COLORSTEEL® is made, tested and trusted for New Zealand conditions. COLORSTEEL® Matte is one of the latest innovations and adheres to all COLORSTEEL® standards.

• Appearance: Uses microwrinkle paint technology to evenly diffuse light